SKR v2 Electronics Case for use with the BTT TFT35-MZ Screen & Raspberry Pi 3B+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All in one case for the SKR v2 + BTT TFT35-MZ and a Raspberry Pi 3B+ w/ cooling
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 1059
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I originally designed this case for my Anycubic Mega Zero v1, but it'll work on any printer and use either the original Mega Zero v1 LCD or the BTT TFT35-MZ Colour LCD.
It includes space for a 40x40x20mm (or x10) 24v intake fan which I've found does a great job of cooling all components at only 40% speed. For the cooling to work well, I suggest using some reasonably tall rubber feet (I'm using 9mm feet from the HW store).
The base is designed to use M3 Heat-set nuts to mount the top case halves and the SKR v2 board - this allows you to take the case apart as often as you like without stripping plastic threads. All other fixings are intended to use M3 screws bolted directly into the plastic.
The design includes multiple locations for zip-ties to be used to manage cables.
I've included the STEP file so folks can mod the design for different screens or Pi versions.