1 / 3
Large Dwemer Plate Steel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One sided Large Dwemer Plate Steel, created based on in-game screenshots
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (17)Powiązane
One sided Large Dwemer Plate Steel, created based on in-game screenshots.
I do have a mostly completed 2 sided version but decided against it, to reduce both supports when printing and post processing time. If someone is interested in this version, let me know and I will finish it off and upload it.
The make in the photo was;
- Printed on an Ender 5 plus
- 0.2mm layer height
- 3 perimeters
- 5% infill
- 30.5hr print
For post processing, see below steps if you want to some tips on replicating the same look in the photos.
- 80 grit sanding for the first round
- Initial filler used was Rosco Foamcoat
- After mixing the Foamcoat within the tub, I separated a small amount and every so often dipped my brush in was water, as I brushed the Foamcoat on
- 320 grut sanding before filler primer
- 1 coat of MTN Pro Grey filler primer
- 400 grit sanding before paint
- 1 coat of Rust-Oleum 2x Ultra Cover - Espresso Satin
- Shout out to @SilverrendProps for the advise on how to achieve the Dwemer look in the photo
- Sponge on some Rub'n'buff Antique Gold to the desired effect
- Spray a coat of sealant