Crux35 Frame - Original strength and bolts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Did your Crux35 frame break? Just print your own and be back in the air within hours!
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 274
- Wydruki
- 1
- Wyświetlenia
- 834
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Key features
- Supports the original bolts and screws!
- Just as stiff as original (when printed correctly)
- Twice as heavy as original
- Easy to print without supports
Tested print settings that work
- 3 perimeters
- 30%+ gyroid infill
- 0.2mm layer height
- filament: ASA or any other stiff plastic
*Please experiment and let me know what worked for you!*
Introduction
The frame of my Crux35 V3 broke after a few flights and I could not manage to find a proper replacement V3 frame for sale. All the listed frames where the older more vulnerable versions.
I decided to print my own while researching a better alternative frame.
It is a copy of the original frame but thicker (8mm instead of 3mm) and heavier (30g instead of 15g). All the bolt holes are countersunk so that you can use the original bolts.
I'm still a novice when it comes to FPV but I don't notice many differences when flying with the 3D printed frame. I might feel the weight and lesser aerodynamics just a tiny bit but I'm not sure because I'm getting the same flight time as before.