Slot Buffer Angled Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket clamp to attach the slot buffer to a vertical beam at a slight offset and angle.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This strong part attaches the slot buffer at a horizontal offset to a central vertical support with four screw holes, and positions it at slight tilt.
This was designed specifically for use with my larger MCS, as I prefer the slot buffer over the Prusa MMU3 official buffer, but needed to position it with an angle so the filament path would be less strained.
The slot buffer itself it unchanged. Nothing screws into the slot buffer. This simply clamps to a side and holds the slot buffer securely suspended in the air.
Link to MCS where you can see how this works in a larger filament path multi color system- https://www.printables.com/model/555238-mcs-multi-color-system-for-prusa-mmu