6001-ZZ Bearing Turntable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple turntable using a 6001-ZZ Bearing, intended for use with 3D Scanning
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a very simple turntable to use for 3D scanning, and I had some nice beefy 6001-ZZ bearings lying around that I wanted to use for it, but I didn't see any others using that bearing, so I figured I'd whip up a quick one.
The included .stl files are for a ~100mm base, but I've included the .step file as well as the Onshape link, which has variables you can adjust for the size of the table as well as the tolerances.
OnShape Link: https://cad.onshape.com/documents/752a5f3bf6ee4eae4304703e
Printing Instructions
Nothing special, print both .stls as oriented and no supports should be necessary. Material shouldn't matter much, I did just basic PLA just fine, but PETG or ABS/ASA should work too.
You'll want something to secure the base, as I didn't include anything like that. I've just been using double-sided tape, but putting on some grippy feet should work too, so long as you're not too rough spinning it.