Circle Template (50 in 1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Circle Template for drawing circles of Ø50-Ø100mm in increments of 1 mm.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 118
- Wydruki
- 2
- Wyświetlenia
- 704
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With this template of only 3.8mm thick you can draw circles from Ø50-Ø100mm in increments of 1 mm. Total weight is about 26 gram, so 0.5 gram per circle….
Printed with 0.4 nozzle, 0.2 layer.
Assembly:
Click the Clamp Ring over the Disc Holder to secure the Turntable.
Please note: for smooth operation it is best to add some lubricant to the edge of the Disc Holder where the Turntable rests. (I used some Vaseline for this)
Usage:
Position the template and press both “ears” firmly down. Use a fineliner or a pencil. The crosshairs in the center are for exact positioning.
Other conceivable use: as a marking aid for making holes for electrical built-in switching equipment or other holes that need to be round (Ø50-100mm).