Fountain Pen with Magnetic Cap V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed to work with the Dryden Design replacement nib found on Amazon. Either the Hooded Fine Nib or the…
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 747
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is designed to work with the Dryden Design replacement nib found on Amazon.
Either the Hooded Fine Nib or the Medium nib will work with the body.
You will also need 2 10mm x 2mm round magnets for the body and cap.
When slicing this you will need to put a stop when the print is approaching the top layer of the magnet cavity so you can place in the magnet.
The updates in this version:
- Body diameter increased to match diameter of cap
- Ink window cut out in body so you can check in level of cartridge
- Magnet positions moved closer to the ends for greater attraction when posted
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Doesn't Matter
Supports:
No
.15mm
Infill:
15%
Filament:
any any any
Category: 3D Printing