Orange Pi Zero 2 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not to take away from the great work others have posted here for cases, but I wanted a case that I could install a…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Not to take away from the great work others have posted here for cases, but I wanted a case that I could install a custom antenna. A short stubby one to be precise. My intended use will be to use this as a network wifi bridge for my printer (non 3d). Tho using it for your 3d printer may work.
Listed below are the parts I got for what you see in my pics.
Extra Parts
Short antenna - https://amzn.to/3ADNXjv
Short U.FL cable - https://amzn.to/3V7J0sX
screws are M3 6mm (x8) or 6 if you only use 2 to hold the board in
Printing
You can use whatever you like, but I will using PETG just in case it gets warm. I used 20% infill, but that's subjectable to what infill pattern you use, and what you feel like using.
Assembly
install the threaded U.FL cable in the case, then install the board. You can do it in any order, but this way you won't damage the board if you struggle with the cable. Then install the lid, and the antenna.
Category: Electronics