1 / 2
Extruder Motor Spacer for 3DFused Direct Drive mount — zdjęcie 1
1 / 2

Extruder Motor Spacer for 3DFused Direct Drive mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this spacer to mount my extruder to the motor for my 3DFused Direct Drive bracket since the factory screws for…

Ocena
0 / 5
Polubienia
3
Pobrania
23
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I made this spacer to mount my extruder to the motor for my 3DFused Direct Drive bracket since the factory screws for the extruder were made for the thickness of the motor mount on the frame, which doesn't exist when you mount the extruder directly to the motor, making the screws a tad too long. This makes it so you can keep using the factory screws for the extruder.

Nothing fancy here, just a 3mm thick spacer, set to the same shape of the standard 42x42mm motor and a hole in the middle to fit over the shaft.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

20

Filament: eSun PLA

Black

Notes:

Use whatever you want for filament, unless your planning on printing ABS or something that requires you to keep your chamber crazy hot, then PLA may start to squish, so go with PETG or ABS for it.

Category: 3D Printer Extruders

Tagi