Ender 3 LCD Base (4040 style)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a base sled to mount the Ender 3 display to if you don't want it mounted to the printer for whatever reason. I…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a base sled to mount the Ender 3 display to if you don't want it mounted to the printer for whatever reason. I started with the 4040 rails from https://www.thingiverse.com/thing:3309758 to create this so it would have the same vibe of the material the printer is built on. Probably a lot of unnecessary walls and such, but hey, it looks cool and it holds it pretty firm.
Post Processing: Not much to do here. Probably will want to hit the screw holes with a 5/32 bit, or whatever it is in mm, if you're going to use the screws that came with it. It was 4.3mm on my caliper for that bit and it was a good snug fit. You should also pre-tap the hole with the screw so you're not fighting it when you mount the display bracket to it.
Note: When I get some time, I'll fix the holes to fit the screws without needing to drill them first
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Filament: Overture PLA+
black
Category: 3D Printer Accessories