1 / 4
Third Reality Humidity sensor mount for F-Box Stacker — zdjęcie 1
1 / 4

Third Reality Humidity sensor mount for F-Box Stacker

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A bracket for the Third Reality hygrometer/temperature sensor to fit inside the Stacker F-box drybox.

Ocena
0 / 5
Polubienia
3
Pobrania
22
Wydruki
1
Wyświetlenia
303
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I use the ThirdReality zigbee humidity/temp sensors to monitor my dryboxes. They are relatively inexpensive, and they have a decently large screen so that I can check the humidity directly without needing a smartphone; but they also hook up to my Hubitat zigbee hub so that I can check the humidity on my phone from anywhere and get notifications about humidity changes.

The mount fits into the smallest space on the side of the F-box next to where the PTFE tube enters, leaving the three larger spaces available for desiccant packs. The sensor fits in any orientation in the bracket. The humidity reading is best seen in the horizontal orientation, but is only partially occluded in the vertical orientations. I‘m not too bothered about it, given the the limitations of the small space it is crammed into and the whole clamshell design of the drybox.

I hope you find it useful.

Tagi