Replacement for Eriba bed leg clip / holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement clip for the clips that hold the bed legs in Eriba Touring / Triton / Puck / Pan caravans and maybe others.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
We bought an Eriba Triton caravan from 1997 and found most of the clips that hold the bed legs to be broken or almost broken, so I drew a replacement in Fusion and printed them in PETG with 15% infill. I've reinforced the design a little bit to reduce the chance of them failing again.
You can still slide the ‘strap’ upward over the notch that has a slope, which incidentally also makes it easy to print.
In the original design the ‘hinge’ clip and the ‘catcher’ clip are identical, but I found that with PETG the catcher took way to much force so I made a dedicated catcher version that needs a lot less force.
The bed legs have a 25mm diameter in my case.