1 / 1
Linear Advance K-Factor Calibration Cube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rough Calibration Cube for Linear Advance K-Factor Calibration
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 182
- Wydruki
- 1
- Wyświetlenia
- 937
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
Printing
In Slic3r:
- Layer Height: 0.2mm
- Infill: 0%
- Solid Layers: 0 (Top and Bottom)
- Add
M900 K0.0to your Printer's Start G-Code
Interpreting the results
Formula
K = floor(h) / 10
Step by Step
- From the bottom, measure the height of the layer with the least “blobby” corners.
- Round down to a multiple of a millimeter (example: 2.7mm → 2.0 mm)
- Divide by 10
- This is your new K value.
Apply your new K-Factor
In Slic3r:
- Replace
M900 K0.0with the new K-Factor.
