Chainable baseplate for 1L Applikon bioreactors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The base plate for 1L Applikon bioreactors to put those in place and prevent sliding on the workbench
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial
Colleagues were working with Applikon bioreactors and, due to safety regulations, had to use those in the ventilated fumehood on top of the perforated surface. The native Applikon stand is sliding on the perforated metal surface of workbench and the need to prevent sliding has appeared. Important point was to keep the option to quickly remove reactors with the stand over time and put back (per say, to autoclave reactors).
This model was design in compatibility with previous work of colleague, with some extra reinforcement and draining holes in case of spillage.
The test parts were printed with PETG, and to protect the holder against pH adjusting solutions, a few layers of PLASTIK 70 spray have been applied.
Designed in Solidworks 2021. These models were designed as part of work at Wageningen University and Research.