1 / 2
Wolfcraft FZ40 Clamp Edge Banding Upgrade — zdjęcie 1
1 / 2

Wolfcraft FZ40 Clamp Edge Banding Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple addon for Wolfcraft FZ40 Spring Clamp to convert it into Edge Banding Clamp.

Ocena
0 / 5
Polubienia
10
Pobrania
48
Wydruki
0
Wyświetlenia
652
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Simple addon for Wolfcraft FZ40 Spring Clamp to convert it into Edge Banding Clamp. Printing is done in PETG with 0.20mm height and 0.6mm nozzle. Beside 3D printed parts 4 M3x10 screws are needed and 4 M3 bolts. Also you need rubber strap with dimensions 70x28mm and 2 pads with dimensions 24x17mm. 

Tagi