Thermometer Holder (ThermoPro TP50) for Non-damaging 3 pin base plate for usage in Ikea Platsa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for a ThermoPro TP50 thermometer than can be glued at my Non-damaging 3 pin base plate for Ikea Platsa.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 631
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a holder for a ThermoPro TP50 thermometer than can be glued at my “Non-damaging 3 pin base plate” for usage in an Ikea Platsa. I recommend to use UHU Plast special glue for this.
I have attached the original FreeCAD (I am using 0.19) source file (Thermometer Holder.FCStd) so you can adapt the file base on your requirements, e.g. parallel to the front door or with different angle, in case you want to mount it on the left side in an Ikea Platsa.
In case you are using my holder and / or base plate, please share a make with a link to your design.
Print Instructions:
No supports required
0,2mm (Quality)
PLA (or other filament types)
20% infill