Fairphone 5 case with space for Niteize Hitch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Fairphone 5 case that comfortably fits a Niteize Hitch
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the very slightest of modifications of the original case to just add a small bit for a Niteize Hitch (https://www.niteize.co.uk/products/hitch-phone-anchor-tether) to fit in without creating a bump, and a slot to feed the tether ring through to avoid having to put it through the USB port. I've now taken my phone in this case to a festival for five days and it held up perfectly well.
I typically use OpenSCAD and I didn't really know what I was doing with FreeCAD, so there was probably a better way of doing this, and I'm also not sure why the exported model decided to omit one side of the rounded cutout and instead put it as a solid cylinder somewhere for you to have to cut off in your slicer.
Printed on an Ender 3 V2, with 3DWarhorse red TPU. Full supports in SuperSlicer.