1 / 6
Freezer basket holder replacement (Whirlpool) — zdjęcie 1
1 / 6

Freezer basket holder replacement (Whirlpool)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an easy Whirlpool freezer basket holder replacement. It has a slightly larger hook than the standard model

Ocena
0 / 5
Polubienia
3
Pobrania
44
Wydruki
0
Wyświetlenia
157
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an easy Whirlpool freezer basket holder replacement.

It has a slightly larger hook than the standard model because the default one sometimes slipped of the railing. (The 3D-printed one is in purple.)

 

Also, there seems to be quite a lot of different baskets out there. My holder fits baskets that have holders with approximately 50 mm between the holes. You should be able to measure it in most 3D software, so you can be sure that it fits yours :)

 

You could print it either standing or lying down. Both will have their strengths and weaknesses, but I think standing is better for it's use case.

 

Its the same as the default BambuLab “0.20mm Standard @BBL P1P”, just with normal supports enabled

0,20 mm layer

15% Infill

2 walls

normal supports

4mm nozzle

Tagi