Double rotor addon for wind turbine MK2

Big thanks again to rosch8 for the brilliant original wind turbine! With these parts you can convert the MK2 wind turbine into a double rotor in opposite directions.

The M3 screws for the rotor blades are screwed directly into the spinner. I recommend drilling the holes beforehand with a 2.5 mm drill. I recommend slitting the threaded rod at the back so that you can tighten the nut and hold it against it. 

Required:

1x bearing 608ZZ for rotor

1x threaded rod M8x130 mm for rotor

3x nut M8

6x cylinder head screw M3x16 for rotor blade 

Assembly: 

Install threaded rod M8x130 in MK2 rotor without rear nuts, Distance10, Doppelnabe with bearing and RotorblattR, Distance8, stick or glue ring on KoerperV. nut M8 secure with a drop of CA or alternatively lock a second nut, screws for Koerper.

I printed all the wind turbines with PLA. I recommend brighter PLA up to 35°C air temperature. If it is warmer or if darker filament should be used, then use PETG or better ASA, if the printer is suitable for ASA.

I would be happy about a make or remix...

I would also like to recommend my other wind turbines:

Double wind turbine MK3 counter rotating

https://www.printables.com/de/model/883528-double-wind-turbine-mk3-counter-rotating

Wind Turbine MK3 neo Remix

https://www.printables.com/de/model/882595-wind-turbine-mk3-neo-remix

Archimedes Wind Turbine Remix

https://www.printables.com/de/model/773350-archimedes-wind-turbine-remix

Ugrinsky Vertical Axis Wind Turbine Remix 

https://www.printables.com/de/model/769216-ugrinsky-vertical-axis-wind-turbine-remix

Mini Airplane Wind Turbine

https://www.printables.com/de/model/643163-mini-airplane-wind-turbine

Savonius Vertical Wind Turbine Remix 

https://www.printables.com/de/model/775074-savonius-vertical-wind-turbine-remix

Darrieus Savonius Turbine Ver.2 Remix 

https://www.printables.com/de/model/776180-darrieus-savonius-turbine-ver2-remix

Windturbine MK2 neo Remix

https://www.printables.com/de/model/782829-windturbine-mk2-neo-remix

Illusion Windturbine 200 / 250

https://www.printables.com/de/model/785427-illusion-windturbine-200-250

Toroidal Illusion Windturbine 

https://www.printables.com/de/model/790615-toroidal-illusion-windturbine

Illusion Windturbine TIE F. Tail Fin

https://www.printables.com/de/model/796246-illusion-windturbine-tie-f-tail-fin

Wind Turbine 620 mm

https://www.printables.com/de/model/810511-wind-turbine-620-mm

Wind turbine savoniov helix – Remix

https://www.printables.com/de/model/843331-wind-turbine-savoniov-helix-remix