Hole/Drill Guide for Wood Soffit Vents
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hate ugly soffit vents?? Save your money and make beautiful ones yourself! ✨
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 800
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't know about you but I hate the look of metal soffit vents. Especially with and beautiful stained wood soffit… Well, don't compromise your beautiful soffits - make the vents with the same material!
This guide is intended to be used with a wood clamp and a ½" (12.8mm) drill bit - preferably a forstner bit to prevent blow out and chipping. The idea is to clamp the printed guide to your tongue-n-groove board while aligned to the center of the board, drill your own holes, then staple wire mesh on the inside (attic side) of the board over the holes. Air vents freely while the wire mesh keeps the bugs and critter's out.
Other features:
- Notches/Windows for Center Marks
- Ledge to Support Clamps on the “Tongue Side”
- Labeled “Tongue Side” and “Groove Side”
- Chamfered Edges for Easy/Comfortable Handling
Printed in Black PLA+
Perimeters/Walls: 5
Infill: 10% - Aligned Rectilinear
Supports: Nah
I hope you find this model helpful and please post your makes!
If you love this model, please consider Buying Me a Coffee or maybe send a tip via Cash App! ♥
https://buymeacoffee.com/claytr0n
https://cash.app/$claylinco