1 / 2
Soundcore motion + support for monitor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modeled these supports to attach on top of monitor. The clamps that attach on the monitor are aroun 26mm thick.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 1253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (15)Powiązane
I created these support for the ANKER SOUNDCORE MOTION + to attach them on top of a 27 inches monitor. THe monitor is 26mm thick
I have attached stl and step files in case you want to modify them.
