Sovol SV06 Relocation Display Panel to Front
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the bracket to relocated the LCD Display to the front left, in combination with a Back Cover of the display.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 223
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
All credit to the original bracket from ideenwerk.me to relocate the display to the front.
I made following modifications :
- cut out the embossed decoration on the front cross member of the Sovol SV06 so the bracket fits more snug to the front cross member and ‘selfaligns’ during installation. The 2 socket head screws can now be shortened to M4x20 (instead of original M4x25).
- adapted the inside top ledge and recess on the inside of the bracket so it can accomodate the LCD display fitted with the Back Cover for the LCD Display by rogerquin.
- removed the cutout on the bottom, it is flat now, to avoid printing support (that needs cleanup afterwards) or long bridges during printing. With the embossed decoration cutout on the backside of the bracket, there was otherwise no ‘flat’ surface anymore without significant overhang or long bridges.
I pretapped the M6 holes in the side with a M6 thread tap, to make it easier to screw the M6x10 in straight.
All was printed in Sovol Blue PLA. The greenish color change in the picture showing the bottom view with the Back Cover, is just due to the difference in light, all is the same blue.