1 / 8
Lámpara de cerebro RGB / RGB Brain Lamp — zdjęcie 1
1 / 8

Lámpara de cerebro RGB / RGB Brain Lamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Base con 3 leds RGB que simula la sinapsis cerebral. Base with 3 RGB LEDs that simulates the brain synapse.

Ocena
0 / 5
Polubienia
8
Pobrania
115
Wydruki
0
Wyświetlenia
790
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Español:

Introducción: 

Esta base interactiva con LEDs RGB es ideal para proyectos de ciencia y decoración futurista. El corazón del proyecto es una placa personalizada que utiliza los circuitos integrados NE555 y CD4017 para alternar los colores de tres LEDs RGB, creando un espectacular efecto de sinapsis cerebral. Los LEDs iluminan un cerebro impreso en 3D con filamento transparente, ofreciendo una impresionante visualización de los destellos de color. Todo el sistema es alimentado por un módulo de carga de baterías de litio, asegurando una operación eficiente y portátil.

Características Detalladas:

  • Dimensiones de la Base: 10cm x 10cm x 2cm.
  • Componentes Electrónicos:
    • 3x LEDs RGB cátodo común.
    • Circuitos integrados: NE555 y CD4017.
    • Módulo de carga de baterías de litio que proporciona una alimentación estable de 5V. Enlace al módulo de carga
    • Batería LiPo. Enlace a la batería
    • Conector USB tipo C. Enlace al conector
    • Placa PCB Brain V1.0. (adjunto archivo Gerber)
    • 10x Resistencias 1/4W (1x 1Kohm, 6x 100ohm, 3x 150ohm).
    • 1x Potenciómetro 10Kohm.
    • 1x Condensador electrolítico 100uF 16V.
    • 6x Conectores XH (3x 2 pines, 3x 4 pines).
    • 1x Interruptor.

Materiales Recomendados:

  • Filamento transparente para el cerebro impreso en 3D, preferentemente PLA.
  • Otro filamento para la base y los otros componentes estructurales; yo usé PLA de madera.

Montaje y Conexiones:

PCB Brain:

  • Soldar todos los componentes electrónicos en sus respectivos lugares.

Conexiones Finales:

  • En el módulo de carga, conecta el USB tipo C para alimentarlo, el cable de alimentación al conector ALIM (pasando el positivo por el interruptor), y el de la batería al conector BAT1 de la PCB Brain.
  • La batería se conecta a BAT2 de la PCB Brain. (BAT1 y BAT2 es un puente).

Notas Adicionales:

  • La placa PCB Brain se mandó a fabricar por la empresa JLCPCB.
  • Para regular la velocidad de la conmutación de los LEDs, varía el valor del potenciómetro.
  • Una vez montado todo, tuve un problema con la alimentación del módulo de carga, dado que necesita un consumo de 50mA y toda la electrónica me consumía 20mA. Lo solucioné poniendo en paralelo, en el conector de ALIM de la PCB Brain, una resistencia de 1/2W con valor de 82ohm para asegurar el consumo mínimo y su funcionamiento.

 

English:

Introduction: 

This interactive base with RGB LEDs is perfect for science projects and futuristic decoration. The heart of the project is a custom board that uses NE555 and CD4017 integrated circuits to alternate the colors of three RGB LEDs, creating a spectacular synapse effect. The LEDs illuminate a brain printed in transparent filament, offering an impressive visualization of the color flashes. The entire system is powered by a lithium battery charging module, ensuring efficient and portable operation.

Detailed Features:

  • Base Dimensions: 10cm x 10cm x 2cm.
  • Electronic Components:
    • 3x RGB LEDs with common cathode.
    • Integrated circuits: NE555 and CD4017.
    • Lithium battery charging module providing a stable 5V supply. Link to the charging module
    • LiPo battery. Link to the battery
    • USB type C connector. Link to the connector
    • PCB Brain V1.0 board. (Gerber file attached)
    • 10x 1/4W resistors (1x 1Kohm, 6x 100ohm, 3x 150ohm).
    • 1x 10Kohm potentiometer.
    • 1x 100uF 16V electrolytic capacitor.
    • 6x XH connectors (3x 2-pin, 3x 4-pin).
    • 1x switch.

Recommended Materials:

  • Transparent filament for the 3D printed brain, preferably PLA.
  • Another filament for the base and other structural components; I used wood PLA.

Assembly and Connections:

PCB Brain:

  • Solder all electronic components in their respective places.

Final Connections:

  • On the charging module, connect the USB type C to power it, the power cable to the ALIM connector (passing the positive through the switch), and the battery to the BAT1 connector on the PCB Brain.
  • Connect the battery to BAT2 on the PCB Brain. (BAT1 and BAT2 are bridged).

Additional Notes:

  • The PCB Brain board was manufactured by JLCPCB.
  • To adjust the LED switching speed, vary the potentiometer value.
  • After assembly, I encountered an issue with the charging module's power supply as it requires a 50mA consumption, and all the electronics consumed only 20mA. I solved this by placing a 1/2W 82ohm resistor in parallel at the ALIM connector on the PCB Brain to ensure the minimum consumption and proper operation.