Air Pump Nozzle Attachment Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Somewhere to keep and attach those nozzles that come with bike pumps and compressors.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 145
- Wydruki
- 3
- Wyświetlenia
- 659
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Somewhere to keep and attach those nozzles that come with bike pumps and compressors. Very handy to use up that last meter of filament too!
Two versions to choose from;
- 3x holes
- 4x holes
The thread of the Schrader valve is very fine - too fine to reliably be able to print it. This design has no threads in the model, but it has three flats that allow you to tap/cut your own threads using a metal nozzle or attachment.
Grip the metal nozzle with pliers of some sort, and screw the printed part onto it. Remove and repeat on each hole. You will then be able to securely screw in any softer plastic attachments.