Motorcycle battery positive terminal extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows to relocate a motorcycle battery positive terminal extension for easier charging/jump starting.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I want to charge or jump-start my BMW G 650 Xchallenge motorcycle battery without the use of tools.
You need a M6 x 15mm hex bolt and, optionally, a ring terminal connector. Alternatively, just use a drill press to create a hole in the bolt near the hex head and solder the cable there. For jump-starting, a short and thick cable should be used.
The bolts needs to be heated (heat gun or torch) for inserting.
I have printed it with PETG and a 0.6mm nozzle with a Creality K1 Max. The thread fits perfectly after multiple turns (to remove debris). If it does not fit, you can edit either the thread tolerance in Siemens Solid Edge or scale the models.
The back cover can be glued with superglue. I have sanded the faces for better stickiness.