Backlit Curved Lithophane Stand (140mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Backlit, curved stand for a 60 degree lithophane.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the minimalist look of the original but wanted a backlight for the lithophane I had already printed; none of the models I found met my desired specs so I mixed my own.
This stand includes a box to hold an esp8266 along with cable management. I inserted a rubber grommet through the back and soldered a USB cable with power button to the board and a couple of WS281b LEDs. WLED allows RGB or white temp control of the backlight along with timer, if desired.
https://kno.wled.ge/
My litho was not tall so the LED mount I designed was short enough to not show above the picture and angled back slightly to cover the image. The attached files include the stand and microcontroller cover by themselves, as well as combined stl and obj files for those that prefer to get it over with at once.