Cone for Blowgun-Dart (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The new version of the cone, completely rewritten
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 137
- Wydruki
- 2
- Wyświetlenia
- 630
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a complete rewrite of the model for a dartcone.
You'll need the BOSL2 library and obviously OpenSCAD.
To the parameters:
caliber the caliber (inner diameter) of your blowgun in mm
shaft_diameter the diameter of the needle you plan to use
these are the most important parameters to set for your need.
cone_ratio the ratio conelength:caliber
Alle wall parameters should be a multiple of your nozzle size.
wall cone wall thickness
vanewall thicknes of the vanes
neckwall thickness of the wall at the neck
neck_height height of the neck
dovanes set to false, if you don't want vanes
n_vanes number of desired vanes (3 is the minimun number that has a sense)
vanes_twist vane's twist in degrees (set 0 for no twist)
vanes_tolerance how much vanes shall be smaller than the cone diameter
neck_tol Tolerance for neck hole
caliber_tol Tolerance for caliber
cone_neck_overlap how much the neck should go inside the cone
socket height of socket
Modifying the parameters works as in my other models: copy the file defaultcone.scad, modify the copy to your needs and let OpenSCAD do the rest.
I print those cones with a 0.2mm nozzle, 0.1mm layer height and TPU (Medium Flex by extrudr)