Stackable Can Dispenser - Every Sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable can dispenser, easy to print, easy to use
- Ocena
- 5 / 5
- Polubienia
- 527
- Pobrania
- 1609
- Wydruki
- 6
- Wyświetlenia
- 8758
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This stackable can dispenser can be used in a fridge. Select the correct size for your specific cans. They can be from 5 to 9 cans deep. The following chart give the assembled dimensions of the stackable can dispenser. Every dispenser is made of 3 parts. They can be printed on a standard printer (prusa i3 size). To assemble, you need to push a length of filament in the holes between the parts. 4 length in total. I recommend to use quality filament (PLA+, PETG). The parts can't be mixed, every zip file contain the 3 compatible parts.
Nozzle size of 0.4mm or 0.5mm is preferred. Any layer height works.
This model is free. If you wish to tip me or support me, you can do so at this link: https://www.printables.com/model/773888-infinity-calander
Please leave makes, comments and suggestions.