Spatula / Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this spatula to lift objects off my print bed without damaging the bed surface. It has round edges to not cut…
- Ocena
- 4,788 / 5
- Polubienia
- 203
- Pobrania
- 3895
- Wydruki
- 67
- Wyświetlenia
- 8197
- Oceny
- 52
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I made this spatula to lift objects off my print bed without damaging the bed surface. It has round edges to not cut into the surface and is thin enough to do the job. See Print Settings for optimal results.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2 MMU
No
Supports:
No
0.1mm
Infill:
30% Honeycomb
Filament:
FormFutura PLA Orange
Notes:
Use 0.1mm layerheight for first- and all other layers to have it thin enough to slip between printed part and bed. Other settings:
Top/Bottom solid layers: 5Vertical Shells: 4
Seam Position: rear (orientation as shown in the pictures of the finished print)
All Quality Settings in Slic3er except "avoid crossing perimeters"
Category: 3D Printer Accessories