Prusa MK2s MPP Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Tool Tray for the Prusa MK2s Multipurpose Platform. It has 4 screw holes to attach it to the MPP, sized for…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a Tool Tray for the Prusa MK2s Multipurpose Platform. It has 4 screw holes to attach it to the MPP, sized for M3x10 (Multiplexer spares :D). It provides space to put in tools frequently used when working on the printer and it has an area to place screws so your work space stays organized.
There's a version to mount it on the left or on the right side and the filenames are labeled as such. It has quite a thick bottom (5mm) so the 10mm screws can sink in completely, you might want to cut away 3mm if you have M3x7mm screws lying around.
Note: you will need the corresponding Platform (V2 or OLD) to attach this Tray to the Prusa, which you can find here: https://www.thingiverse.com/thing:2647792
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2 MMU
No
Supports:
No
0.15
Infill:
40% Rectangular
Notes:
The box shown in the pictures was printed with PLA, 4 Vertical Shells and 4 Top- and Bottom Layers
Category: 3D Printer Parts