1 / 1
Ubiquiti Unifi G5 Turret Ultra under eve mount or wall mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Under eve mount for ubiquiti G5 Turret Ultra that uses the hardware that comes with the camera
- Ocena
- 4,5 / 5
- Polubienia
- 34
- Pobrania
- 304
- Wydruki
- 0
- Wyświetlenia
- 4414
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 7)Remiksy (0)Kolekcje (51)Powiązane
I couldn't find a Unifi G5 Turret Ultra under eve mount anywhere online, so I decided to make one myself. The holes on the printed mount line up with the base of the camera. You will need to trim the 6/32 screws down to about 6mm using some wire strippers. If the camera is going to be mounted somewhere where it will get wet I recommend putting some silicone where the cable comes out of the mount.
