HeroMe Gen 6 (Mod. for Creality CR-6 SE ABL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified HeroMe Gen 6 Base with compatibility with Orbiter V2, Phaetus Dragonfly BMS and CR-6 Strain Gauge ABL.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
(!!THIS IS NOT PRODUCTION READY!!)
Under passive development for more than two years, I present a HeroMe Gen 5/6 base mod that enables compatibility with the stock CR-6 SE auto-bed leveling (ABL) solution.
This is my first project involving the creation of models for a 3D printer toolhead - there are a lot of imperfections and rough spots that could be improved on. In particular, this model is not easy to assemble! Given the use of heat-set inserts in the base, one has to go through some rather frustrating steps to actually get everything properly assembled. You might actually be in danger of stripping some screws based on your ability (or lack thereof) to fit a screwdriver or other tools into spaces that need to fastened down with a bolt and insert.
This project can be expanded in a number of ways, such as swapping the current insert-and-bolt mounting method for the base/carriage with one that uses rare-earth magnets and metal pins for alignment/centering (though this might mess with solutions such as Beacon ABL).
I just wanted to get this project finished and uploaded, as I had enough issues with scope creep as it is. One of the goals with this project was to learn more about best practices in making complex SOLIDWORKS assemblies (and gain some experience in the process) - which I certainly exceeded.
Most files are saved under SOLIDWORKS-compatible file extensions after being exported with “Pack & Go.” If you are interested in this project and would like 3MF, STEP or STL file formats, please contact me directly and I'll be happy to oblige!