Flex steel plate bed guides for Voron 2.4 300mm build, 304.8mm bed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guide end stops to line up the flex steel on your bed
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 1162
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are my Flex steel bed end stop guides for Voron 2.4 300mm build, 304.8mm bed. I use the Mandala Rose Works Ultra flat 6mm bed. I didn't use the DIN 466-B spacers but my spacers are 7mm heigh. The height from the 2020 extrusion to the top of my flex plate is roughly 16mm. That is the 7mm spacer, the 6mm bed, the 2mm magnet sticker and my 1mm KB3D textured plate. You can adjust according to your setup. I printed version 6 and it works but made some edits to v12. V12 is .2mm wider overall on inside and has two, 3m holes for mounting on the 2020 extrusion. I have not printed V12. I have Cartographer probe so you will have to verify if these will be in your way. Good news is it only takes about 30 min to print so give it a shot.
To Print:
I used IIID ASA-CF Black.
I also use OrcaSlicer with .6mm nozzle and stock .24mm height profile. Extruder temp at 270C and 100c bed.