Planter #2 - Kumiko Hemp Leaf using a split design, multi-material (AMS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Planter/Pots using a split design, multi-material (AMS). Plates and drainage model.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Planter with a simple split design for multi-material printing and 2 holder plates.
Two different filaments are used, a Marble PLA and a black PLA.
Two different patterns for the upper part of the pots are used:
1- Kumiko Hemp Leaf
2- Angled slash
Two different Plates/bases are provided:
1- Rectangular double base
2- Circular single base.
Planters with drainage as well as non-drainage designs are provided.
The pots have been tested with water over a 24 hr. period and did not leak, but these are PLA so will eventually swell and/or leak over extended usage. An epoxy or other sealant would not be a bad idea.
The planters are 80 mm height x 90 Width.
With the base, 85 mm height with a 200mm wide base.
No supports required.
The slicer settings for the base(s) and planters themselves:
Sunlu PLA+ Marble
Eryone PLA Matte Black
The slicer settings for the plater/pots and circular base:
.20 mm Strength
Infill % - 100 , Rect
Wall Loops - 8
Top Shell - 8
Bottom Shell - 8
Seam: Random
The slicer settings for the rectangular base:
.20 mm Strength
Infill % - 100 , Rect
Wall Loops - 8
Top Shell - 8
Bottom Shell - 8
Seam: Aligned