parametric Blowgun grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a parametric grip for Blowguns according to the rules of the german DSB.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've seen some blowgunners use grips on their blowguns. So I created my own that follows the rules of the german DSB (Sportordnung Blasrohr).
The main parameter is the outer diameter of the tube - obviously :-)
The axis is designed for a piece of metal, I used a piece of a wardrobe hanger you get from the laundry cleaning. You can also increase the axis_d parameter and use a M3 screw.
I printed the claw in PLA and the grip in TPU to get a bit smoother feeling.
The included STL is rendered for a tube of 18mm outer diameter.
As always you'll need the BOSL2 library together with OpenSCAD to change the parameters.