1 / 2
Ferris Wheel of Rings (with pins)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The same design from A2S_dESING, remixed to make assembly a little bit easier with guiding pins
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
The same design from A2S_dESING with guidance pins
Printed in PLA on a Bambu P1S - I also changed the slightly rounded geometry of the wheels to be squarer to reduce warping.
It can be test fit, but superglue is still recommended for assembly (I have found the thicker gel brands are much easier to use with PLA)