Geonaute W200 Kalenjii cases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dech atlon Geonaute W200 Kalenjii case replacements
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 288
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Don’t dump your precious Kalenjii W200 just because the strap broke apart!
As W200s long owner, I felt the struggle to see the thing becoming completely useless
What can we do with a full working W200 but impossible to wear, since case+straps replacements are not available?
So I decided to draw a full replaceable case, almost perfectly fitting the shape of the original one.
The custom case requires to embed the original M SWIP (W500 W700 e W900)strap joints
or the standard (22mm W) straps.
The challenge was to not modify the original watch structure, keeping the slots (locking the original rubber case) and at one time minimising the whole thing dimensions.
So here are the results!: n.3 types custom case to make your W200 live again 😊 :
- With Dechalon joints for original M SWIP straps:
https://www.decathlon.it/p/cinturino-orologio-strap-m-swip-compatibile-w500-w700-e-w900/_/R-p-11730?mc=8360791
If you don’t want to buy the original you can easly found the STL version somewhere.. 😉
- With joints for standard straps (22 mm W )
- With joints for standard straps (22 mm W) – LEG O compatible version (very usefull! :-D)
As from the added pics, you can easily remove the original case & straps releasing the two locking rods, accessing them by the case sides. The watch simply pops in the 3d custom case, no need of watch mods, glue, screws etc.
Disclaimer!:
- Successful results depend on many factors, mainly the type of filament + printing parameters
- For my samples I used PLA+ and PLA. Durability could depends on the material choice
- I printed the samples with my old Ender 3 Pro, with 0,4 nozzle. Due to the the very small details, smaller nozzles could surely give better results
- The 3d model with original female joints could need some manual refinig to better match Dechatlon straps.
- I suggest to print the cases the way they come with the STL file to avoid to spend too much time/filament generating huge supports and increase accuracy of the 3d printed model
- It would be better to set in CURA the supports EVERYWHERE. This to avoid deformations of the joints. Also this will require some cleaning inside them at print end
Enjoy!