Model Yacht/Boat Cradle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this for a model yacht I'm preparing for my grandsons.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is designed to take a small model Yacht to display it and carry out repairs.
It is part of a larger project which you can read about on my Instructables feed.
I am printing it out in PETG because of the water factor.
I have included the following file types
Fusion 360 .F3D, .Step and STL, so that you can amend it to your needs, should you wish to do so.
You will need to print out the following.
2 x Boat Cradle End Plate v3
4 x Boat Cradle Rail v3
Print Settings:
Standard Quality
Nozzle: 0.2mm
Fan Speed: 45%
Supports:
Type:
3 walls
4 top/bottom layers
15% Cubic infill
Material: eSun PETG
Colour: White
Amount: 132 g
Time to Print: 15 Hrs 39 Mins