1 / 7
Earring pendant Vintage retro indie hippie circle — zdjęcie 1
1 / 7

Earring pendant Vintage retro indie hippie circle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This earring model has several pieces that you can use as you like.

Ocena
5 / 5
Polubienia
31
Pobrania
77
Wydruki
2
Wyświetlenia
347
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

There are several files, all of which are parts that can be interlocked. However, I strongly recommend using PVC glue to ensure they don't come apart. You can use any of them in different colors.

 

The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can increase the speed of the first layer to 40%). After that, you can adjust the speed as needed, keeping it between 80% and 100%.


Remember to add supports to ensure a proper attachment.🧀🧀

but I always advise keeping them active in case of any minor detail that the ring may need (that varies depending on the program you are using or your machine).

 

 

I'm a bit sleepy, can you help me with a beer? It's to keep creating things 👽🤘 buymeacoffee.com/instintkiller

Follow and more info: https://linktr.ee/instintkiller  🖤

Tagi