Cesca Style Cantilever Bent Chrome Chair Glide with a Center Post
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chair glide with a single center post that press fits into holes in the base of a Cesca-style cantilever chrome chair.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 274
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
A remix of the very excellent design, Glides for Cantilever Chair. The remix has an addition of a solid center post that press fits into the frame holes, much like the Cesca chair original glide design. The fit is very snug and secure and works in PLA as well as PETG. PLA is less flexible and harder to get on and off. PETG will be stronger. They must be press fit on or off rather than rotating, otherwise the center post will snap. Once installed them seem pretty durable.
Print Settings:
- .2mm line height
- 40% infill
- bed adhesion: brim
- supports: tree supports, touching buildplate only
- bed orientation: Turn the design and print it on the flat side with the post parallel to the build plate. See photo.
