Front Speaker Pod Replacement for Honda Civic/CRX DelSol
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable replacement part for 90s Honda Civic/CRX DelSol vehicles. Pattern also used by Acura and Mini Cooper models.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 283
- Wydruki
- 0
- Wyświetlenia
- 1920
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This fits the screw pattern in the front doors of a Honda Civic DelSol. As far as I know, this same OEM part was also used by the standard Civics and some Acura and Mini Cooper models. No guarantees though!
Fits 6.5" (16.5cm) speakers, I added 4-hole and 3-hole patterns. The inner diameter is exactly 140mm and it should fit most aftermarket speakers.
Should be printed in ABS or ASA (or better). DO NOT PRINT IN PLA!
I made the screw holes 3mm in diameter. The original interor screws fit but be careful while cutting the threads with the screw, go slowly and in and out a few times.
This part was made because I enjoy proper looking plastic parts, using MDF to fashion an adapter is still valid, I prefer the almost-OEM look tho.