Laundry washing machine and dryer drain hose adapter/joiner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Joiner fitting for the drainage hoses of a washing machine and condenser-dryer.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 373
- Wydruki
- 2
- Wyświetlenia
- 2566
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- BSD License
Pipe fitting adapter/joiner for the drain hoses of a washing machine and condenser-dryer. As printed it fits my Bosch washer and Haier dryer perfectly.
The model is parametric, so should be adjustable for other sizes. As uploaded, fits a tub with 34mm drain, washer hose 25mm and dryer hose 15mm.
It should be obvious, but it's worth stating: using PLA should be ok for temperatures around 40⁰C, however, it will soften significantly at temperatures 60⁰C and over. If you're washing with higher water temperatures, you will need to use a filament with better temperature stability - even PETG adds about another 20⁰C. I'm currently using PETG, and it survives 60⁰C washes.