Replacement steering knob for MJX Hyper Go remote
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My remote fell on a sticky mouse trap. I couldn't clean the sticky goo off the foam so I designed this replacement unit.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v2.0
I have a couple MJX Hyper Go RC cars I drive around with my daughter. One of the remotes fell into one of thos sticky mouse traps. I couldn't clean the sticky goo out of the foam, so I decided to create a replacement part.
I wanted to be able to drive the car with one hand, so I added some little ridges so I can move the knob with the thumb from the same hand I use to operate the throttle.
It fits tight. You may have to scale up or scale down depending on the accuracy and precision of your printer. PETG is probably a good choice. I printed mine with PLA.