Mega Lego-like Roller Skate (10:1 scale)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now your Mega Lego-like Minifigure (10:1 scale) can roll where ever he or she want's
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 822
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Your Mega Lego-like Minifigure (10:1 scale) can now excercise and roll wherever he or she wan'ts with this Roller Skate in 10:1 scale.
Best quality is to print with 0.16 layer lines for the skate and wheels with 7% infill and outside to inside walls
Hubcaps can be printed in 0.2 only toplayer has to be fine.
Roller skate is made out of different parts to get the easiest print and you can use different colors for the wheels and skate itself, the hubcap can be glued inside the weel if you wan't the middle the same color as the skate.
Connector pins are a bit bigger than the original ones from the mega figure and fit the top and bottom part before using glue to check allignment, pins are not excact alligned front to back.
All parts need to be glued