Camera Mount - Sidewinder X4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera Mount for Sidewinder X4, including M6 and 1/4" screws, and Fusion file.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 153
- Wydruki
- 1
- Wyświetlenia
- 720
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed in PLA with 50% infill. It seems to be holding up fine, but I'd recommend either something a bit less flexible, or 100% infill.
The arm length can be adjusted in the fusion file by going into User Parameters (Modify/Change Parameters), and setting the arm length to whatever you'd like. It is currently set to 100mm.
I'm using a Creality Nebula Camera, which uses the M6 screw. I'm not entirely happy with it, as it wants to stay in b&w/night mode, even with the lights on, unless I turn on the lamp on the printer, which then it flickers between color and b&w