Screw on glass bottle hanging bird feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
bird feeder to screw on a 250mL, or 1L glass bottle
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a nice bird feeder for my parents balcony, but couldn't find one I liked.
So I found a 1/4th litre glass bottle laying around my place and designed one myself around it.
I'm not that happy with the roof part look, but I'm not good enough in virtual sculpting yet to achieve what I had first in mind.
Still this very simple solution do the job.
I designed the distributor part so birds can empty the bottle to the last seed.
The control ring allows to adapt birdseeds flow to seeds size, birds appetite and/or messiness.
I initially made the distributor bottom flat to spare on support settings and cleaning, but it also make the feeder rather stable, so if you don't want to hang it, you can just set it on a flat surface.
I also provide models for a more common 1L bottle, but I only printed myself a screw on test part for this size.
And I also add a funnel if you need one, filling the bottle can be rather messy.
Bottles specs:
0.25L TO38 glass bottle (twist off cap, neck external diameter around 38mm, main body diameter around 58mm)
1L TO43 glass bottle (twist off cap, neck external diameter around 43mm, main body diameter around 88mm)
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
.4mm nozzle ; .2mm layer height
Filament: sunlu pla+wood wood
Notes:
Only the "main feeder" parts require infill, and critical parts should be thin enough to be strong enough anyway, so use whatever infill settings you like.
The vase mode funnel version may require a bigger nozzle to be strong enough.
Post-Printing
Eliminate potential stringing.
If you plan on hanging the feeder, screw a hook directly at the tip of the roof, or make one or two holes and add a string loop.
Push the bottom of your bottle inside the roof cylinder, it should be tight enough to hold it as is, but you may need or like to add crazy glue, epoxy, or silicone caulking, something that can glue glass.
Fill the bottle with birdseeds, screw on the distributor, flip the whole thing.
Hang the feeder or set it on a flat surface.
Enjoy.
Category: Outdoor & Garden