Drop hanging planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Big hanging sculpture you can put a plant in
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this thing after sawing a similar object somewhere, but more angular, made from 20*20mm wood pieces and with less branches. So I designed mine to my likes.
But if I ever come to remake this, I would do it in rhino 3d, and with an even number of branches
UPDATE:
came back across this and decided to draw a new 6 branches version
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
.4mm nozzle ; .2mm layer height
Infill:
25% cubic
Filament: Sunlu PLA+WOOD
Wood
Notes:
Beware, the main part is about 400mm tall and 250mm wide single print
Support only in contact with bed surface was sufficient for me
Post-Printing
Light sanding, staining or painting if you like.
Plant something in the pot.
Stack up everything on the optional stand
or better, make a hole at the tip to fix a rope or something and hang it near your window
Category: Outdoor & Garden