Tupperware 1607-15 TPU Lid for Spaghetti
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tupperware 1607-15 TPU Lid for Spaghetti container.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a TPU replacement list for a Tupperware 1607-15 lid used on spaghetti storage container.
It is designed for Flex material and may not be usable with others.
This has a seal on the outside and the inside of the lid brim.
The lid surface is 2.2mm thick to cut down on the porous attributes of printing flex.
Some dimensions
lip diameter at the top 84.4mm
lip diamerter at the bottom 83.2mm
lip height is about 8.3mm
Printed at .2mm with .4mm nozzle
No supports needed.
One option has a fork with spaghetti in the image, but with flex and being the first two layers may not render well because of the small lines.
I did make this with the CAN TPU LID Generator. You will find this lid on the pre-built size menu. You can use the dimensions it puts in the dialog box after selecting the option to make your own. Change the lid size back to custom and enter the dimensions you want to change.