Simplest Instax Polaroid Stand with Text
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Instax Polaroid Stand with an insert for a Text
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of “The Simplest Instax Polaroid Stand” for a souvenir give away at an upcoming party.
Took the idea of Andor Yoko and reworked the stand almost from scratch. Wanted an easy print without any supports and therefore designed a insert for a text.
I uploaded two version:
- 54mm Version: exact width of an Instax picture
- 57mm Version: (which I printed) to allow for a slightly bigger text
Print the stand in upright position, without any supports and with a brim.
Creation of Text:
- used "Nautilus Pompilius" (https://www.1001fonts.com/nautilus-pompilius-font.html)
- converted image to SVG
- imported in Fusion 360 and tweaked it to make it “more connected”
I uploaded the blank insert for the text. From the bottom to the text of the insert should be 4mm. I used 0.5mm to stabilize the text.
The text needs to be printed with a color swap in order to have a distinguishable text. The base has height 0.8mm (as I designed it for a 0.2 nozzle). But to get a better quality print I ended up using a 0.25mm nozzle.
