Proxxon MF70 CNC Conversion Fix for Bubblegum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The part is marked as WIP since I need to fix the face plate on the back. You can already use the parts if you install…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 911
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The part is marked as WIP since I need to fix the face plate on the back. You can already use the parts if you install the original Proxxon plate on the back of the lower axis.
The original files for the lower axis are off center on my MF70. I made a new lower motor assembly which works with the original Proxxon screws.
v2 Changes
- Added Nema 17 mount and ensured it is concentric with the ball bearing pocket
Thicker 4.5x5mm adapter The shaft collar and the M5xM4.5 adapter need M3x10 screws and M3 nuts. Use these until you have your mill setup. Then mill your own ;)
Do not add thread glue to the shaft collars! All brands I have tried will weaken PLAThe preview image looks a bit rough because it is printed with a 0.6mm nozzle with 0.3mm layers. For final print I'd recommended a layer height of 0.15mm to 0.2mm with a 0.4mm nozzle.
Category: Machine Tools